Time alignment with smaart 7

| | 0 comments

images time alignment with smaart 7

If I am going to apply corrective EQ to the sub to get a white flat response, which is better, subtractive or additive? Very cool. Don't like this video? Like this video? Why is cross-firing your mains good, but sub overlap is bad? Going to try both next weekend. Using Smaart V8 to phase align subs to mains. If you now turn on both the subs and the tops, both transfert function traces should add up 6dB in the crossover region. Here are the basic steps: Ideally perform the test outdoors, in an open space away from any structures, where there are no room modes or reflections to interfere with the measurements Lay the top and sub cabinets down on the ground if the sub isn't too tall you can stack the top on the sub Place the measurement microphone at least 10' away from the speaker stack to get a similar path distance from both top and sub.

  • Smaart procedure for aligning subs and tops
  • time alignment using smaart livesound

  • Smaart procedure for aligning subs and tops

    I downloaded the 30 day demo of smaart 7 and I think after reading various articles and I turn off the subs and smaart finds a delay time of 39 ms for the tops.

    New to this forum and Smaart, and was wondering if there a section or post that deals specifically with setting FOH time alignment (in a quick. › › Audio Measurement and Testing.
    Get YouTube without the ads.

    In your transfer function thingy, click trace.

    Video: Time alignment with smaart 7 How to verify main+sub alignment in Smaart® [GSwSST34]

    Add to Want to watch this again later? If your delay is set correctly, follow the acoustic crossover point up to the phase traces and you should see that the sub and top phase traces lay right on top of one another at that frequency and hopefully around that frequency. Nathan Lively 10, views.

    images time alignment with smaart 7

    images time alignment with smaart 7
    Time alignment with smaart 7
    Make an Impulse measurement and learn how to make a better one than the Auto-Delay does.

    Bob McCarthy: Where do I place my delay towers?

    Video: Time alignment with smaart 7 How to Time Align Your Main to Your Front Fill Using Smaart® Live IR

    Thanks for the non-tech rundown! More Report Need to report the video? Donovan Cline 82, views. Learn more. Published on Sep 13,

    Below is a draft workflow for aligning subs to tops using Smaart that I have I'd appreciate anyone willing to take the time to 'beat up' this.

    images time alignment with smaart 7

    › sound-system-tuning-on-tour-with-Sm. By that I mean poorly-informed decisions caused by a lack of understanding with regard to physics that lead to over- or under-coverage and poor time alignment.
    Sign in.

    Merlijn van Veen 12, views.

    time alignment using smaart livesound

    Smaart - sub woofer alignment with Keith Morris - Duration: Published on Nov 15, Using more averaging might help too. Timo Beckman 2, views. For this example we will use Hz.

    images time alignment with smaart 7
    Time alignment with smaart 7
    The bass is very quiet.

    Sign in to make your opinion count.

    images time alignment with smaart 7

    Adam Black Newbie Offline Posts: Autoplay When autoplay is enabled, a suggested video will automatically play next. How to do it properly: Turn on your tops, with pink noise, like you did.

    0 thoughts on “Time alignment with smaart 7”